OsKar sliding suction rail is designed to easily access and remove gas and dust pollutants from working area. It can work together with OsKar self-supporting fume arms (4" or 6") or for removing engine exhaust gases with flexible hose, nozzle, balancers etc. Rails may be used in long workshop areas to reach emmission points which are spread apart. The basic components of the rail include the rail sections in aluminium with standard lengths of 10ft/3m length. A trolley moves on the external track. The trolley includes a connecting flange to attach OsKar self-supporting fume arms.(please specify arm diameter) or to mount flexible hose (specify hose diameter). The rail is designed to mount on the wall or from the ceiling. Single segments of sliding rail can by easily joined together to attain greater lengths. When installing only one fan a maximum length of 45ft/15M is recommended . Segments of special construction, with different lengths other then standard are available on special request.

Equipment which can be mounted to the connection flange of the trolley:

• FumEz self-supporting fume arm - the sliding suction rail is normally made to direct mounting 6"/160mm fume arms, to mount arms with other diameters an additional flange is required.
• Flexible hoses for extraction of vehicle combustion gases (different diameters and lengths) - in this case one flange connector is needed and also a gear clamp. The other end of hose is equipped with a nozzle. To hang it to the rail use a balancer.