OsKar Exhaust Hose Reels are designed for the extraction of car and truck exhaust gases at the tailpipe which are emitted inside buildings. They are designed for facilities such as vehicle service garages and vehicle storage garages as well as hard to reach areas for many other types of fumes and gases. A flexible hose mounted on the reel allows for extraction of gas-air mixture with max. temperature 1150C (2000F). The OsKar hose reel is made from steel components which are galvanized or painted.

Motorized Hose Reel - radio remote control

Oskar electric motor-driven hose reels are designed to handle both large and small diameter hoses in areas where the hoses are required to be completely rolled into the drum or rolled up high enough to allow the passage of overhead cranes, high vehicles or large equipment.

The motor-driven reel can recoil lengths of hose up to 55 ft (17M or 6" (150mm) hose. The mtor-driven reel is designed to be either ceiling suspended or wall mounted.

Spring Assisted Retraction

The spring mechanism housed on one of the sheaves allows easy manual unrolling and automatic retraction of the flexible hose. The hose may be placed in almost any position by means of a ratchet locking device mounted on the Spring Cassette.

The reel is constructed to operate with the Sliding Exhaust rail. Flexible hoses in diameters 4" (100mm), 5" (125mm) and 6" (160mm) and varying lengths may be installed. The inlet end of the flexible hose can be equipped with different types of nozzles which adapt to the tailpipe. The outlet of the reel is designed to connect flexible hose or spiral duct with a diameter of 6". A fan may also be directly mounted to the reel. >/p>